
VSParticle
VSParticle sells tools and a service that print nanoporous layers, thin porous coatings used in electrolysers, gas sensors and batteries. Its dry process uses electric sparks to turn metals into nanoparticles and deposit them directly onto a customer's substrate, with no binders or wet chemistry. Customers can also send in a substrate and have VSParticle coat it on demand.
- Hardware
- New Materials
Funding
Raised to date
$26.8MRaised to date based on public sources. This may differ from the amount the company actually raised and is based only on what is publicly available on the internet.
$22.9M across 2 disclosed rounds


NH$7.1M · Series A Extension
Announced Aug 2024
Disclosed cumulative: $22.9M
Reported total $26.8M
Incomplete round history. $3.9M of the $26.8M reported total isn’t matched to a known round.
Founders
Product
Problem
Companies making electrolysers, gas sensors and other thin-film devices need porous coatings with a high surface area, but conventional wet chemistry is slow, hard to reproduce and leaves chemical residues behind. Each new material recipe can take weeks to test.
Solution
VSParticle's tools use spark ablation: a spark between two electrodes evaporates metal atoms, which condense in a stream of inert gas into nanoparticles 2 to 20 nm across. A nozzle then accelerates the particles onto a surface, where they assemble into a porous layer. The process is dry and needs only electricity, a carrier gas and electrodes, so no binders or solvents end up in the coating. Thickness, porosity and pattern are set by the printing parameters and the movement of the stage. Customers can buy the VSP-G1 Nanoparticle Generator and VSP-P1 Nanoprinter, or use VSParticle's deposition service to have layers printed onto their own substrates.
Target Audience
R&D teams and manufacturers in electrolysis, gas sensing, catalysis and semiconductor devices.
Features
- Print nanoporous layers from more than 40 elements, including alloys and mixed-metal compositions.
- Coat a range of substrates, such as Nafion, porous transport layers, ITO glass, silicon wafers and MEMS chips.
- Tune particle size, layer thickness, porosity and pattern through the process settings.
- Order ready-to-test coated substrates, including iridium-coated titanium porous transport layers with loading down to 0.1 mg/cm² and sizes up to 15 x 15 cm.
- Have sensing layers printed directly onto wafers without masks.
- Reproduce the same layer at different scales, from small test samples toward production volumes.