Skip to main content

Pure Battery Technologies

Pure Battery Technologies makes precursor cathode active material (pCAM), the main ingredient in lithium-ion battery cathodes, from intermediate nickel and cobalt materials and recycled battery scrap. Its patented refining process skips the metal separation step used in standard refining, and the company says it emits up to 85% less CO2. The material goes to battery and electric vehicle supply chains, and the company can adjust its composition to a customer's requested ratios.

Traction 6/10
Brisbane, Australia · HQ
Founded 2017233K+ followers
  • Chemical Technology
  • Battery Technology
  • Clean Technology
  • New Materials
Updated yesterday

Funding

Raised to date

$2.3MRaised to date based on public sources. This may differ from the amount the company actually raised and is based only on what is publicly available on the internet.

Funding rounds are not available yet.

Founders

4 founders

Bjorn Zikarsky

CEO

Stephen Wilmot

Chairman

William Hawker

Chief Technology Officer

Thomas Fahrner

Executive Director

Product

Problem

Making pCAM, the precursor material for lithium-ion battery cathodes, normally means separating nickel and cobalt from each other first. That step takes time, uses high heat and toxic solvents, and releases large amounts of CO2, which adds to the carbon footprint of an electric vehicle.

Solution

Pure Battery Technologies refines intermediate raw materials such as Mixed Hydroxide Precipitate (MHP), a nickel and cobalt concentrate from mining, or black mass, the shredded remains of recycled batteries, into pCAM. Its patented process skips the metal separation phase entirely, so the nickel and cobalt stay together through refining. The company says this cuts CO2 emissions by up to 85% compared with standard refining methods. Because the process is simple, the company can adjust the ratio of metals in the output to produce bespoke battery material for a client. It also runs a plant in Hagen, Germany, that currently makes nickel chemical products and is being expanded to produce pCAM and BNC materials at a planned capacity of at least 10,000 tonnes per year.

Target Audience

Battery cell and cathode manufacturers, and companies in the electric vehicle supply chain that buy cathode materials.

Features

  • Refine MHP or black mass into pCAM without a separate metal separation step.
  • Get battery material mixed to a requested metal ratio.
  • Use recycled battery scrap or off-spec material as feedstock alongside raw minerals.
  • Buy pCAM made with a process the company says emits up to 85% less CO2.
  • Source material from a plant with existing nickel chemical production experience.
This profile is AI-generated and may contain inaccuracies.