Skip to main content

iCore-corp

iCore makes auto focus modules and other parts for machine vision systems, the cameras that inspect products on factory lines. Its modules measure the distance to a part and move the lens to keep it sharp, and the company says they update focus up to 1.2kHz. The company also sells strobe controllers, light sources, and signal repeaters and splitters.

Traction 5/10
Anyang-si, South Korea · HQ
Founded 201912700+ followers
  • Hardware
  • Industrial Automation
Updated yesterday

Funding

Raised to date

$3.8MRaised to date based on public sources. This may differ from the amount the company actually raised and is based only on what is publicly available on the internet.

Funding rounds are not available yet.

Founders

1 founder

Choul Park

Chief Executive Officer

Product

Problem

On a factory line, a camera inspecting parts has to stay in focus as objects of different heights pass underneath. Adjusting the lens by hand is slow and easy to get wrong, which limits how fast and how accurately a machine vision system can inspect.

Solution

iCore sells an auto focus module that fits inside automated optical inspection (AOI) systems and microscopes. The module measures the distance to the object, using either optical triangulation or through-the-lens (TTL) sensing, and moves a Z-axis actuator to hold focus. Control runs on an FPGA, a chip that can be programmed for fast, repeated processing, and the company says focus updates reach up to 1.2kHz. The module can track up to five pre-set layers in a stacked structure, so it refocuses as the inspection moves between layers. Buyers can connect it through analog and digital outputs or a step motor driver.

Target Audience

Makers of automated optical inspection equipment and microscopy systems, and integrators building machine vision setups for electronics, semiconductor, battery, display and automotive production.

Features

  • Keep a camera in focus automatically as parts of different heights pass the lens.
  • Track up to five pre-set layers in a stacked product.
  • Switch objective lenses with a linear lens changer, which the company says takes 0.2 seconds at ±1μm accuracy.
  • Choose models built for large-aperture FA lenses or for microscope objectives.
  • Drive the focus motor directly through a built-in step motor driver.
  • Add strobe controllers, light sources, and repeaters and splitters from the same supplier.
This profile is AI-generated and may contain inaccuracies.